We’d risk a guess that a majority of homeowners are probably most familiar with forced air unit heaters and might not realize that there are other options for heating a home – other options that are more efficient and even more comfortable. One such option is radiant floor heating, which, as opposed to warm air systems, delivers the source of heat upwards from the floor level, not from the ceiling. Radiant heaters or radiant energy is the oldest form of heating used to provide comfort and is the basis for all heating systems. Radiant energy is heat efficiently radiating outwards, and is absorbed by an object without physical contact with the heat source or by heating the surrounding air, as is the case with convective, forced air systems.

It might be hard to believe, but under floor heat was first used by the Romans. While under floor heating was initially reserved for the rich, it eventually became increasingly commonplace in public buildings and villas. This form of radiant heating was used particularly in the colder regions of the Roman Empire. The Roman system was based on hypocausts, comprising ducts that underlay the floor (itself built on raised brick piles) and flues that were built into walls. Hot air or steam from fires circulated up through this system, warming the floor and walls, with heat passing into the rooms.

If you’re looking for efficient, comfortable heat for your home, radiant floor heating could the solution you’ve been looking for. 

When replacing a home heating system, there are a lot of questions that people have in regards to new home heating systems.  Here is a questions that was recently asked.

Q: My 1,200 square foot home used to be heated by a furnace from 1949 that ran at 25,000 BTU. Recently I changed the system to a newer, 7,000 BTU system. I thought this newer heater would be more efficient, but I find that it takes much longer to heat the house than the older system did. Is there something wrong with my furnace or do I need one that has a higher BTU?

A: It’s a good idea to replace old heating systems with newer, more efficient models. These new models can work just as well or better than old systems, but they do work differently. Where old furnaces could be turned on and heat the house within a matter of minutes, new heating systems can take longer. If you want your home to be warm at a certain time, set the heat to go on about 45 minutes prior to that.

Another important factor is whether your home is “weather-tight.” Make sure all doors and windows are properly sealed. If not, you may be losing heat at the same rate your heating system is producing it. Check with a heating contractor who can tell you whether the new unit is sized correctly for your home’s square footage.

Radiant Heaters Tip: Radiant energy is totally pure radiation and is absorbed by an object without physical contact with the heat source or by heating the surrounding air, as is the case with convective, forced air systems.

For homeowners or renovators, it’s worth taking a look at several kinds of radiant heaters for residences or businesses. Today we’ll discuss the electric cable heating system kind of radiant heaters.

Electric cable heating systems, often called line- or high-voltage systems, are gaining popularity and are ideal for heating smaller areas like bathrooms, kitchens, and sun rooms. These systems are comprised of a thermostat and a heating cable. On some radiant heater systems, the cable will be shipped to you as a large spool of cable. These systems are oftentimes less expensive, and give you the ability to space the cable how you want and customize a layout that will heat every square inch of your floor. Other systems have the cable attached to a plastic mesh or tape to create a mat to maintain its proper spacing.

Every available radiant heater cable system is equally effective, so when determining which system to purchase, you should look at the warranty of the product, along with the ease of installation. Some cables must be embedded in a separate layer of concrete or mortar, whereas other systems can simply be installed in the thinset.

Most cable systems can only be installed under tile; on others, if the cable is embedded in mortar or concrete, any flooring can be installed on top of the concrete.

Radiant Heaters Tip: When heating smaller areas with a radiant heater, it is nearly impossible to beat the simplicity and price of an electric cable heating system. 

Radiant Heaters Tip: The variety of high efficiency boilers or electric radiant floor systems makes radiant heat one of your most efficient ways to heat your home.

Sometimes can be hard to narrow down what kind of radiant heaters to install. There are dozens of products available to purchase, and there are even more companies telling you that their product is the best.

For many homeowners, electric cable heating systems, often called line- or high-voltage systems, are gaining popularity and are ideal for heating smaller areas like bathrooms, kitchens, and sun rooms. These systems are comprised of a thermostat and a heating cable. These radiant heater systems are oftentimes less expensive, and give the ability to customize a layout that will heat every square inch of your floor.

Every available radiant heater cable system is equally effective, so when determining which system to purchase, you should look at the warranty of the product, along with the ease of installation. Some cables must be embedded in a separate layer of concrete or mortar, whereas other systems can simply be installed in the thinset. Most radiant heater cable systems can only be installed under tile. However, on others, if the cable is embedded in mortar or concrete, any flooring can be installed on top of the concrete.

Radiant Heaters Tip: When heating smaller areas, it is nearly impossible to beat the simplicity and price of an electric cable radiant heating system. 

Mostly the radiant heat panels are attracted to the sub floor using approximately 10 screws per panel. Manufacturer recommendations include screwing and fastening adhesive when installing the panel. An electrometric bonding material is placed in the grooves prior to tube installation. The tube is pressed into the groove flush with the surface of the panel. Though the installation does not take much time, you may want to consult the professionals at warmzone.com if you’re considering installing your own radiant heating system.

With a name like Warmzone, we have an unspoken obligation to live up to the task of matching our customers to the best available system of warmth and comfort.  We strive everyday to ensure that our products and our knowledgeable, dedicated staff will leave memories of service that is second to none, and products that will provide years of enjoyment.

A brief history of Warmzone allows consumers to understand why Warmzone was created. Warmzone realized the growth in the radiant heat industry was causing problems for consumer and contractors due to the abundance of technical information and product choices. Making the right choice for a radiant heat system is crucial and carries serious implications to its cost and effectiveness.  Serving as an intermediary between manufacturers, contractors and consumers, Warmzone’s role is to match individual needs of a project to a heating system that makes the most sense.  We strive to match our customer’s needs with the finest radiant heating systems available.  Warmzone.com offers non-biased, individualized solutions that factor the installation, durability, performance and operational investment as the key criteria for our customers.

There are several variables that Warmzone considers when looking at a project.  Some of these variables include:  square footage, the type of floor covering, the amount of heat needed for a given area, whether that heat will be the supplemental or primary source, how well insulated that environment is, and if it is a major remodel or completely new construction.
           
Based on this criterion, we can then discuss the benefits of a radiant heating system and which technology would be most appropriate for a consumer in terms of effectiveness, efficiency, operational costs and overall upkeep and maintenance.

Because radiant heat is relatively new in the United States, there is a continuing need to educate consumers about a wide variety of radiant solutions.  In the interest of avoiding confusion and finding the best possible application, Warmzone has done most of the homework for our prospective customers.  Our professional consultants learn the details regarding your heating goals and then propose a system that can be easily installed and will fit your budget.  Warmzone continues to strive toward being viewed as the premier radiant provider.  “We want customers to feel confident in this market and receive honest information and pricing regarding the best available products,” says Brandon Weaver, Vice President of Sales.

With so many options in the radiant industry, Warmzone.com is helping contractors and consumers with the pros and cons of each system.  Representatives of Warmzone suggest the best possible system for any project.  We are not tied to any one manufacturer and will provide the very best in pricing and information available.  Warmzone has a very direct relationship with select manufacturers thus eliminating the ‘one size fits all’ sales pitch normally received by homeowners. Using various forms of technology, Warmzone’s focus is to provide customers with the most pertinent information in record time. We know this is the key to establishing trust and long term partnerships.

As heating costs skyrocket, radiant heating continues to come to the forefront.  We at Warmzone excel in providing options that are affordable, convenient and specifically tailored to the needs of individual consumers.  As we match products with needs, we continually strive to provide our customers with “warm, pleasurable” heating experiences.  After all, feeling warm IS a wonderful thing!

We would welcome the opportunity to serve your needs. Visit us at www.warmzone.com, or call us directly at 1-888-488-WARM.       

About Warmzone
Warmzone provides consumers with energy-efficient, radiant heating solutions for homes and businesses. Based in Salt Lake City, Utah, Warmzone's electricians and radiant heat experts will help you determine the best radiant heating solution, ranging from electric heated floors to large commercial snow and ice melt projects. Send us a plan or drawings and we'll be happy to provide you with a FREE estimate and options for your roof heating and ice melting project.